LOWER INSTRUMENT PANEL
COVER
REMOVAL
(1) Remove instrument cluster bezel. Refer to
Body, Instrument Panel, Instrument Cluster Bezel,
Removal.
(2) Remove the two screws along the lower edge of
the panel cover.
(3) Grasp left lower instrument panel cover from
the bottom and pull rearward to disengage clips.
(4) Remove lower instrument panel cover from
vehicle.
INSTALLATION
(1) Position the left lower instrument panel cover
over mounting slots and firmly snap into place.
(2) Install the two lower panel cover retaining
screws.
(3) Install the instrument cluster bezel. Refer to
Body, Instrument Panel, Instrument Cluster Bezel,
Installation.
INSTRUMENT PANEL BEZEL
REMOVAL
(1) Remove HVAC control knobs from control head.
(2) Remove both center A/C outlet louvers (Fig. 5)
by rolling downward and pulling out.
(3) Remove two screws retaining the top front of
the center bezel up inside the center A/C outlet duct.
(4) Using a trim stick (special tool #C-4755) or
equivalent, gently pry out on instrument panel cen-
ter bezel.
(5) Remove bezel from vehicle.
INSTALLATION
(1) Position the instrument panel center bezel over
mounting slots and firmly snap into place.
(2) Install the two screws retaining the top front of
the center bezel up inside the center A/C outlet duct.
(3) Install both center A/C outlet louvers (Fig. 5)
by snapping into place.
(4) Install the HVAC control knobs onto the control
head.
Fig. 5 A/C OUTLET LOUVERS
1 - INSTRUMENT PANEL CENTER AIR DUCT
2 - OUTSIDE AIR/RECIRC CONTROL KNOB
3 - MODE CONTROL KNOB
4 - BLOWER SPEED KNOB
5 - TEMPERATURE CONTROL KNOB
PL INSTRUMENT PANEL 23s - 11
ProCarManuals.com
To Next Page
Loading...
