Dodge Neon 2001 - Page 632

(65) Install oil filter and new o-ring (Fig. 151).
(66) Apply an 1/8” bead of Mopart Silicone Rubber
Adhesive Sealant to oil pan and immediately install
to case (Fig. 152).
(67) Install oil pan-to-case bolts and torque to 19
N·m (165 in. lbs.).
(68) Install solenoid/pressure switch assembly and
gasket to case (Fig. 153).
(69) Install and tighten solenoid/pressure switch
assembly-to-transaxle case bolts to 12 N·m (110 in.
lbs.) (Fig. 154).
Fig. 151 Install Oil Filter
1 - OIL FILTER
2 - O-RING
Fig. 152 Install Oil Pan
1 - OIL PAN
2 - 1/8 INCH BEAD OF RTV SEALANT
3 - OIL FILTER
Fig. 153 Solenoid/Pressure Switch Assembly and
Gasket
1 - SOLENOID/PRESSURE SWITCH ASSEMBLY
2 - GASKET
Fig. 154 Attaching Bolts
1 - BOLTS
2 - SOLENOID AND PRESSURE SWITCH ASSEMBLY
PL 41TE AUTOMATIC TRANSAXLE 21s - 117
41TE AUTOMATIC TRANSAXLE (Continued)
ProCarManuals.com
2001 NEON