Dodge Neon 2001 - Page 648

INPUT SHAFT
DESCRIPTION METRIC SPECIFICATION
End Play 0.127-0.635mm 0.005-0.025 in.
TORQUE SPECIFICATIONS
DESCRIPTION N·m Ft. Lbs. In. Lbs.
Bolt, Differential
Cover-to-Case
19 — 165
Bolt, Differential Ring
Gear-to-Case
95 70 —
Bolt, Differential Bearing
Retainer-to-Case
28 21 —
Bolt, Driveplate-to-
Crankshaft
95 70 —
Bolt, Extension Housing/
Plate-to-Case
28 21 —
Bolt, Oil Pan-to-Case 19 — 165
Bolt, Output Gear 271 200 —
Bolt, Output Gear
Stirrup/Strap
23 17 —
Bolt, Oil Pump-to-Case 27 20 —
Bolt, Reaction Support-to-
Case
27 20 —
Bolt, Solenoid/Pressure
Switch Assy.-to-Case
12 — 110
Bolt, Torque Converter-to-
Driveplate
75 55 —
Bolt, Transfer Gear Cover 20 — 175
Bolt, Valve Body-to-Case 12 — 105
Fitting, Oil Cooler Line 12 — 105
Nut, Tranfer Gear 271 200 —
Tap, Transaxle Pressure 5 — 45
Screw, L/R Clutch
Retainer
5—45
Screw, Solenoid/Pressure
Switch Assy. Connector
4—35
Screw, Valve Body-to-
Transfer Plate
5—45
Sensor, Input Speed 27 20 —
Sensor, Output Speed 27 20 —
Sensor, Transmission
Range Sensor
5—45
PL 41TE AUTOMATIC TRANSAXLE 21s - 133
41TE AUTOMATIC TRANSAXLE (Continued)
ProCarManuals.com
2001 NEON