151
Chapter 7 6 HELP Mode
7
S2-Y1540
HELP Mode : 43
1. Function
2. Operating Procedure
(1) Clear the JOB, counter
• The contents and history of the JOB (01-80) and the reset
counter are reset.
• The contents and history of the JOB (01-80) is reset.
(1) Clear the counter
1. Access the HELP Mode “43”, and press the <START> key.
2. Press the <SET> key and the <C> key simultaneously to reset
the JOB. “Please Wait” appears on the LED panel, and the JOB
initialization is commenced. It takes 30 seconds before the
initializing process is completed. Once completed, “FINISH!!”
appears on the LCD panel.
H43 Initialize
↑
+
↓
:All clear
SET+C:JOB clear
Do not turn OFF the power switch while “Please Wait” is displayed
on the panel. If it is turned OFF, please repeat the initialization
process from the beginning
3. Press the UP/DOWN cursor key simultaneously to reset the JOB
and the counter.
IMPORTANT
-0
4. “Initialize now!!” appears on the LCD panel and the HELP Mode “43”
exits automatically.
To Next Page
Loading...
Need help?
General
