DURKOPP ADLER 745-35-10 S - Page 265

Programming
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 263
Testing step motor
 The display switches to Test step motor.
Fig. 225: Test step motor
To test the step motor:
1. Press the button.
 Reference run is carried out.
The following table lists the items that can be set in the Test step motor
menu.
CAUTION
Risk of injury from moving parts!
Crushing possible.
When you advance the transport clamp, the
transport clamp will start at the set speed.
Do NOT reach into the movement area of the
transport clamp.
Do not place any objects in the movement area of
the transport clamp.