EasyManua.ls Logo

ELTEX ESR Series - Page 115

ELTEX ESR Series
575 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ESR-Series. User manual
115
7 Set the password of mobile network
user (if authentication by login/
password required by cellular carrier).
esr(config-user)# password ascii-
text
{ <CLEAR-TEXT> | encrypted
<ENCRYPTED-TEXT> }
<CLEAR-TEXT> – unencrypted
password, set by the string of
[1..64] characters, may include
[0-9a-fA-F] characters.
<ENCRYPTED-TEXT> –
unencrypted password, set by
the string of [2..128]
characters.
8 Activate user (if authentication by
login/password required by cellular
carrier).
esr(config-user)# enable
9 Set the dial-up number for connection
to the mobile network.
esr(config-cellular-profile)#
number <WORD>
<WORD> – dial-up number for
connection to a mobile
network, set by the string of up
to 15 characters.
10 Set the method of user authentication
in the mobile network (optional).
esr(config-cellular-profile)#
allowed-auth <TYPE>
<TYPE> – method of user
authentication in a mobile
network [none, PAP, CHAP,
MSCHAP, MSCHAPv2, EAP].
Default value: PAP
11 Limit the possibility of the use of IP
addresses in mobile network.
esr(config-cellular-profile)# ip-
version
{ ipv4 | ipv6 }
ipv4 – IPv4 family;
ipv6 – IPv6 family;
12 Create USB modem in the router
configuration and switch to the modem
configuration mode.
esr(config)# cellular modem <ID> <ID> – USB modem identifier,
set in the range of [1..10].
13 Specify modem description (optional). esr(config-cellular-modem)#
description <DESCRIPTION>
<DESCRIPTION> – modem
description, set by the string of
up to 255 characters.
14 Specify VRF instance, in which the
given modem will operate (optionally).
esr(config-cellular-modem)# ip vrf
forwarding <VRF>
<VRF> – VRF name, set by the
string of up to 31 characters.
15 Set USB modem identifier allocated by
the system (specified in item 2).
esr(config-cellular-modem)#
device <WORD>
<WORD> – identifier of
connected modem’s USB port,
set in the range of [1..12].
16 Set the previously established
parameter profile to the USB modem.
esr(config-cellular-modem)#
profile <ID>
<ID> – identifier of USB modem
parameter profile, set in the
range of [1..10].

Table of Contents

Related product manuals