•
•
•
Step Description Command Keys
7 Set the marking type for e-mails that the
"Antispam" service classifies as
"Spam".
esr(config-antispam-profile)#
mark-type <MARK-TYPE>
<MARK-TYPE> – the marking
type of an email categorized as
"Spam". Possible values:
header – add the X-Spam
header to email headers;
subject – add the [SPAM]
tag before the subject of
the email.
8 Create the mail domain profile and
mailbox addresses (optional).
esr(config)# object-group email
<NAME>
<NAME>- up to 31 characters.
9 Set the description of the mail domain
profile and mailbox addresses
(optional).
esr(config-object-group-email)#
description<DESCRIPTION>
<DESCRIPTION> – up to 255
characters.
10 Enter the mail domain or mailbox
address into the profile (optional).
esr(config-object-group-email)#
email <NAME>
<NAME>- up to 63 characters.
11 Create a rule in the "Antispam" service
profile (optional).
esr(config-antispam-profile)# rule
<ORDER>
<ORDER> – rule number, may
take values from 1..100.
12 Set the description of the "Antispam"
service profile rule (optional).
esr(config-antispam-profile)#
description<DESCRIPTION>
<DESCRIPTION> – up to 255
characters.
13 Specify the profile of transmitter IP
addresses for which the rule should
work (optional).
esr(config-antispam-profile-rule)#
sender ip <NAME>
<NAME>- up to 31 characters.
14 Set the profile of mail domains and
mailbox addresses for which the rule
should trigger (optional).
esr(config-antispam-profile-rule)#
sender email <NAME>
<NAME>- up to 31 characters.
15 Specify the action for the rule. esr(config-antispam-profile-rule)#
action <ACTION>
<ACTION> – assigned action.
Possible values:
reject – further delivery
of the letter is prohibited,
the sender of the letter is
sent a reply about the
error.
16 Enable a rule in the "Antispam" service
profile (optional).
esr(config-antispam-profile-rule)#
enable
17 Create mail domain. esr(config)# mailserver domain
<DOMAIN-NAME>
<DOMAIN-NAME>- up to 31
characters.
To Next Page
Loading...
Need help?
General
