ELTEX ESR Series - Page 442

ESR-Series. User manual
442
•
•
•
•
Step Description Command Keys
18 Set the description of the email domain
(optional).
esr(config-mailserver-domain)#
description <DESCRIPTION>
<DESCRIPTION> – up to 255
characters.
19 Set the name of the email domain to be
served.
esr(config-mailserver-domain)#
mail domain <NAME>
<NAME>- up to 63 characters.
20 Set the IP address of the mail server for
which the "Antispam" service on ESR
acts as SMTP Proxy.
esr(config-mailserver-domain)#
mail server ip <ADDR>
<ADDR> – in the format of
AAA.BBB.CCC.DDD, where each
part takes values from 0 to 255.
21 Set the "Antispam" service profile, the
settings of which will be applied to the
current email domain.
esr(config-mailserver-domain)#
profile antispam <NAME>
<NAME>- up to 63 characters.
22 Enable mail domain. esr(config-mailserver-domain)#
enable
23 Proceed to the mail server
configuration.
esr(config)# mailserver
24 Set the name of the email domain. esr(config-mailserver)# domain
<NAME>
<NAME>- up to 63 characters.
25 Specify certificates and keys for the
TLS protocol (optional).
esr(config-mailserver)# tls keyfile
<TYPE> <NAME>
<TYPE> – type of certificate or
key file. Possible values:
ca – certificate authority;
server-key – private
server key;
server-crt – public server
certificate;
dh – Diffie-Hellman key.
<NAME> – certificate file name,
set by the string of up to 31
characters.
26 Enable TLS support on the mail server
(optional). If TLS is enabled, the
configuration must include a preset CA
certificate, server private key and public
server certificate.
esr(config-mailserver)# tls enable
27 Set the maximum size of email headers
in KB (optional).
esr(config-mailserver)# headers
max-size <SIZE>
<SIZE> - the maximum size of
email headers in KB, takes
values from 50 to 200.