ELTEX ESR Series User Manual

ESR-Series. User manual
530
•
•
•
Create the script (Administration -> Scripts-> Create Script)
ESR routers support execution of the following priveleged commands:
Ping:
zabbix_get -s {HOST.CONN} -p 10050 -k "system.run[ sudo ping -c 3 192.168.32.101]"
The client (ESR) that received this command from the server will execute ping command to the specified
host (in our example, up to 192.168.32.101) and return the result to the server.
Using the «-c» key with the number of packets in the test is mandatory. Without this key, the ping command
will not stop on its own and the test will not be considered complete.
Ping in VRF:
zabbix_get -s {HOST.CONN} -p 10050 -k "system.run[sudo netns -exec -n backup sudo ping
192.168.32.101 -c 5 -W 2 ]"
The command above will be executed in the specified VRF with backup name.
Fping
zabbix_get -s {HOST.CONN} -p 10050 -k "system.run[ sudo fping 192.168.32.101]"
The client (ESR) that received this command from the server will execute fping command to the
specified host (in our example, up to 192.168.32.101) and return the result to the server.

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization