Epson AcuLaser M2000D - Page 152

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision B
ADJUSTMENT Adjustment 143
Confidential
WRITING METHOD
 USB ID
The method of writing USB ID differs according to the condition of the main board. Referring to the following table, figure out what to do depending on the
condition. For the operational procedure, follow the instructions shown by the program.
 Store optional ID  Store auto-generated NEW ID  OLD ID Retrieval/Restore
Table 5-1. Writing Method
Condition of Main Board Check of the previous ID
Writing method
(button name)
Description
Communication between PC and the Main
Board. is impossible.
The previous ID can be confirmed by a status sheet
or any other sheet that has already been printed out.
Store optional ID Enter the previous ID to write it to the new Main Board.
There is no way to confirm the previous ID. Store auto-
generated NEW ID
The program automatically creates the new ID from the serial number of the
printer and write it into the new Main Board.
Communication between PC and the Main
Board is possible.
(The previous ID can be retrieved from the
previous Main Board)
OLD ID Retrieval/
Restore
Retrieve the ID from the old board, and then enter the retrieved ID into the new
board.