Need help?Do you have a question about the ESIT ECI and is the answer not in the manual?
Provides detailed specifications of the ECI device, including model, load cell input, display type, and operating temperature.
Outlines the key features and functionalities of the ECI device, such as multi-language support, expansion structure, and software update capabilities.
Details the standard modules in ECI E series devices, explaining the Terminal and Weighing modules and their slot assignments.
Explains how to select the operating program (e.g., Weighing, Batching, Filling) upon device startup.
Describes the process of identifying mass with known weight, including selecting load cell type and calibration type.
Explains the calibration procedure using load cell values without any loading, based on mV/V output.
Details the process of calibrating the device using a coefficient value, including sample calculations.
Guides the user through the steps for performing zero calibration on the device.
Explains the operational sequence and steps involved in the batching program.
Details the module requirements and connections for applying the batching program.
Covers Modbus settings within the COM Module Menu, including mode, baudrate, and Modbus number.
Lists the available Modbus commands for reading and writing data.
Details the memory map for Modbus communication, outlining register addresses and their functions.
Explains the functions associated with command register values and their operations.
General| Brand | ESIT |
|---|---|
| Model | ECI |
| Category | Controller |
| Language | English |
To Next Page