ESIT ECI - Taring; Selecting Recipe

To Next Page

To Previous Page

ECI Multi Functional Weighing Controller Operating Manual

Page 281

Examples

14.6.1 Taring

0x06 is written to the Command register for Taring. (Modbus ID:2 was used)

Modbus

Function

Code

Address Data

CRC

Data

When the operation is performed, the same of the data string sent is returned.

14.6.2 Selecting Recipe

0x14 is written to the Command register (Address 0) for Selecting Recipe. Recipe no is written to RegA or

(Address 1). (Modbus ID:1 was used)

Modbus

Function

Code

Start

Address

Number

Byte

Number

Command

Reg B CRC Data

When the operation is performed, the same of the data string sent is returned.