ECI Multi Functional Weighing Controller Operating Manual
Page 196
StabillityDelay
The weighing values during the period indicated in this
parameter are not taken into account and the device does
not change its state in order to prevent the
mismeasurements resulting from the vibration just after
the start of the quick filling and shifting from the quick
filling to the slow one. (Default value is 0 sec)
FillingTimeLapse
It is the maximum period that lapses during which the
weight value does not change at least 10*0 (Resolution)
during batching. The device gives error if this period is
exceeded. If no material is received although the material
intake has started, it is used for giving warning. If no error
signal is wanted, it must be entered as 0 sec
(deactivated).
To Next Page
Loading...