ECI Multi Functional Weighing Controller Operating Manual
Page 140
7.4 Indication Program
This program is the standard weight indicator.
7.4.1 Zeroing
Used for zeroing the indication value.
7.4.1.1 Manuel Zeroing:
key is used in order to make zeroing operation within the limits in Zero/Tare menu.
7.4.1.2 Auto Zeroing
Zeroing is made at start-up. Furthermore in case of stagnancy ( ), the screen is resetted in the %
ratio as selected in "Zero Limit" menu once in every 3 seconds.Other resetting options are explained in
Zero/Tare menu.
7.4.2 Tare
7.4.2.1 Manuel Tare
key is used for taring operation. After taring, the load with the weight of at least 20*e (Resolution) is
left on the weighing platform and if any stagnancy is observed, the tare is automatically cancelled when
the gross value is 0.
7.4.2.2 Auto Tare
There is no auto Tare function in ECI device.
To Next Page
Loading...