ESIT ECI - A;D Count; A;D MV;V

ECI Multi Functional Weighing Controller Operating Manual
Page 101
A/D Count
ADC internal count value is displayed on the
screen. Expresses the numerical equivalent of the
signal connected to the Load Cell module. Count
Value varies depending on the "Load Cell Type"
selection. Maximum values are shown in the table
given below.
Load Cell Type
Maximum Value
Esit 2.0mV/V
6 400 000
2.5 mV/V …160.0 mV/V
8 000 000
A/D mV/V
ADC mV/V value is displayed on the screen.
Expresses the mV/V value received from the
sensor connected to the Load Cell module. It is
used from controlling the load cell output.