ESIT ECI - 14 Annex 5 Modbus Usage; 14.1 Device Menu Settings; 14.2 Connection Point Settings

ECI Multi Functional Weighing Controller Operating Manual
Page 266
14.1 Device Menu Settings
Related settings are under COM Module Menu.
Mode: Modbus must be selected.
Following parameters must be set as the same on the device to be connected.
Baudrate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Modbus Mode: RTU-ASCII
Modbus No: 1-255
14.2 Connection Point Settings
Bits per Second
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Parity
None
Data Bits
8
Stop Bits
1
14 Annex 5 Modbus Usage