ECI Multi Functional Weighing Controller Operating Manual
Page 67
Period
Selection for RS232 serial out sending frequency.
The options are;
7) 6/Min
8) 1/Sec
9) 10/Sec
10) 100/Sec
11) 400/Sec
12) 800/Sec
Not: Period menu is not shown when "Command" or "Stability" modes are selected.
When "Speed" Mode is selected, Period can be selected as 100-800/Sec
When "Accuracy" mode is selected, Period can be selected as 6/Min-10/Sec
When "Detail" mode is selected, Period can be selected as 6/Min-10/Sec
To Next Page
Loading...