ECI Multi Functional Weighing Controller Operating Manual
Page 98
Zero Limit
1) %1 Capacity: Zeroing is made if the weight value
of less than 1 % of the Capacity.
2) %2 Capacity: Zeroing is made if the weight value
of less than 2 % of the Capacity.
3) %10 Capacity: Zeroing is made if the weight value
of less than 10 % of the Capacity.
Start-up Zero
Determines at which ratio of the "Capacity" value will the zeroing be made at first start-up of the device.
The options are;
1) %5 Capacity: Zeroing is made if the weight value
of less than 5 % of the Capacity.
2) %10 Capacity: Zeroing is made if the weight
value of less than 10 % of the Capacity.
3) %25 Capacity: Zeroing is made if the weight value
of less than 25 % of the Capacity.
Note: The start menu is not displayed when "Manuel" mode is selected.
To Next Page
Loading...