ECI Multi Functional Weighing Controller Operating Manual
Page 229
Lower Tolerance
The error quantity accepted below the target value is
indicated. For example if the quantity to be filled is
1000g and acceptable lower limit is 990 g, it is
necessary to enter 1000-990=10 g in the Lower
Tolerance menu.
Note:This step is not visible if "Off" is selected in "ToleranceControl" menu.
Upper Tolerance
The error quantity accepted above the target value is
indicated. For example if the quantity to be filled is
1000g and acceptable upper limit is 1015 g, it is
necessary to enter 1015-1000=15 g in the Upper
Tolerance menu.
Note:This step is not visible if "Off" is selected in "ToleranceControl" menu.
To Next Page
Loading...