ECI Multi Functional Weighing Controller Operating Manual
Page 194
Zero Stripe
During the discharge, it is the value where it is
determined that the discharge operation is over. When
the weight value reduces under this quantity, the
discharge operation is considered done. It is used for the
material stuck to the scale.
RecipeTolerance
It is the maximum error allowed per silo. If this value is
exceeded, the device gives error and related relay output
is activated. It is valid for all silos in the recipe. In case of
false filling from any silo, the error output is activated. If
no error signal is wanted, it must be entered as 0
(deactivated).
To Next Page
Loading...