Service Manual_AVA1_ENG-20220922_I 24
Switching Menus
Service mode and option connection mode have a tree structure classified according to the contents of
each menu. Refer to the service mode list or option connection mode list for menu configuration and
classification.
• Switching menus of the same level
Each press of the ▼ or ▲ key will change the menu display.
• Moving to a lower-level menu
When pressing the SET key in the menu where [SET:>>] is displayed on the LCD second line, it will
move to the lower-level menu.
• Moving to a higher-level menu
To return one level up from the current level, press the MENU key in any menu to move to the
upper-level menu.
• Exiting service mode or option connection mode (return to normal mode)
If the MENU key on any top-level menu is pressed, [Exit Menu?] is displayed. Select [YES] with the
▼ or ▲ key and press the SET key. Exit service mode, and switch to normal mode.
Select [NO] to return to the original menu.
Changing Settings
By pressing the SET key, the menu that displays the printer settings and adjustment values changes to
the change settings screen. On the change settings screen, the setting change target item (LCD second
line) is highlighted.
1. Press the SET key in the change settings menu. It will switch to the change settings screen.
2. Press the ▼ or ▲ key to change the setting values.
3. Press the SET key to determine the setting values. It will switch to the change settings menu.
If you press the MENU key before determining the setting value of 3., the setting value change is
canceled. It will return to the setting change menu display, and the setting value is not changed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
