Service Manual_AVA1_ENG-20220922_I 91
Display of the frequency of every error
To display the frequency of every error.
2nd
line display: [GG-GG HH/II] (when selecting error code)
-GG: Error codes and detailed codes (up to 99
latest) HH: Number of occurrences of
same error code
II: Total number of errors stored in the log
1. SET key: Looks up the frequency of error occurrence (activate
▲/▼ key functions), switches error and detailed codes
2. ▲/▼ key: Switches the error code (when selecting error code),
switches the detailed code
(When selecting detailed code)
- set
Initialization of error codes
To initialize the error codes.
the item, and then press SET key.
CANCEL: Cancels initialization of
the error log
RESET: Initializes the
Displays the total number of print screens
Displays the total number of
print screens.
Counts one for
Counts prints during service mode and cleaning mode.
Printer Setup
ON/OFF of the parallel process function for multiple cards
To set ON/OFF of the parallel process function for multiple cards.
ON: Perform the parallel processing (continuous printing). Print up
to 2 cards at once
through parallel processing in the printer.
Do not perform the parallel processing (prints one card at a
Do not print another
card until the previous card finishes printing (normal eject).
Select the setting value.
Press the SET key, and then confirm the setting value.
Set this item according to the specification of the card printing
system.
ON/OFF of the card empty detection when waiting
To set ON/OFF of the card empty detection when waiting
ON:
Display an error when the printer detects the absence of cards
waiting
Display an error when the printer detects the absence of cards
accepting a print request (Starts printing after canceling the
Select the setting value.
Press the SET key, and then confirm the setting value.
To Next Page
Loading...
