Service Manual_AVA1_ENG-20220922_I 8
Getting started
Unpacking
Your printer is supplied with several accessories that we ask you to look at closely. This list may vary
depending on your location.
The printer is shipped in special packaging designed to prevent any damage in transit. If you notice any
visible damage, do not hesitate to contact the shipper, and immediately inform your Evolis dealer, who
will tell you the procedure to follow.
Evolis takes great care over the quality of its packaging, and we ask that you keep this packaging
somewhere clean and dry.
You will be asked for the full original packaging (outer box, inner wedges, and protective bags)
in the event that the printer is returned. If the printer is returned without its original packaging
and components are damaged in transit, these components will no longer be covered by the
warranty. You will be charged for new packaging for shipping the printer back to you.
Accessories supplied with your printer:
• Power supply unit - SWITCHBOX Type F10723-A or CWT Type KPL-065M.
• Mains power cable.
• USB cable.
• Installation, documentation and software CD-ROM.
• Starter cleaning kit.
• Warranty notice.
If any of these components is missing, please contact your Evolis dealer. Use only the power cable supplied
with your Evolis printer.
Use only the USB cable supplied with your Evolis printer.
The Evolis printer must be placed in a dry location, protected from dust and draughts but well-
ventilated. Take care to keep your printer on a flat, sturdy surface able to bear its weight.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
