Evolis Avansia - Maintenance; 3-1 General Warranty Information

Service Manual_AVA1_ENG-20220922_I 31
ERROR CODE LIST
ERROR
CODE
ERROR MESSAGE DESCRIPTION
Common
description
01-01
FEEDER EMPTY
Card empty error (during card print reception)
01-02 Card empty error (during standby)
04-01
COVER OPEN
Front cover open
05-01 Front cover open during initialization)
06-01 Front cover open (during printing)
0D-01 LOW TEMPERATURE Low environmental temperature error (< 10° C)
10-01
NO RIBBON
Ink ribbon empty error (during initialization)
10-02 Ink ribbon empty error (during printing)
11-01
RIBBON WIND UP
Ink ribbon wind up speed error (used ribbon axis)
11-02
11-03
Ink ribbon wind up speed error (feeding ribbon axis)
11-04
12-XX Ink ribbon feed operation timeout error
13-01
Ink ribbon panel interval error (short) Invalid ribbon 13-02
13-03
13-04
Ink ribbon panel interval error (long) Invalid ribbon
13-05
13-06
13-07
13-08 Ink ribbon black panel position error
Invalid ribbon
13-09 Ink ribbon empty redetection error
Invalid ribbon
13-0A
Ink ribbon empty mark error
Invalid ribbon
13-0B
Invalid ribbon
14-XX Ink ribbon panel position error
Invalid ribbon
15-01 Ink ribbon empty redetection error
Invalid ribbon
17-XX NO RIBBON/FILM Ink ribbon/transfer film empty error
No Film
18-01
NO FILM
Transfer film empty error (initialization)
No Film
18-02 Transfer film empty error (printing)
No Film
18-03 Transfer film empty error
No Film
19-01
FILM WIND UP
Transfer film wind up speed error (wind up axis)
19-02
19-03
Transfer film wind up speed error (supply axis)
19-04
19-05
Transfer film wind up.
1A-XX
Transfer film index mark error (non-detection)
1B-XX
1C-XX
INVALID FILM
Transfer film panel feed operation timeout error
1D-01
Transfer film panel interval error (short) 1D-02
1D-03
1D-04
Transfer film panel interval error (long)
Transfer film panel interval error (long)
1D-05
1D-06
1D-07 Transfer film empty error detection
1D-08 Hologram film type error