Evolis Avansia - Lamination Errors; Lamination Warnings

Service Manual_AVA1_ENG-20220922_I 34
LAMINATION ERRORS
ERROR
CODE
ERROR MESSAGE DESCRIPTION
C0-01 AVANSIA_ERR_LAMI_MECHANICAL Undefined error/warning
C0-02 AVANSIA_ERR_LAMINATE_END Lamination unit end of film
C0-03 AVANSIA_ERR_LAMINATE
C0-04 AVANSIA_ERR_LAMI_COVER_OPEN Lamination unit cover open
C0-05 AVANSIA_ERR_LAMI_TEMPERATURE Lamination unit temperature error
LAMINATION WARNINGS
ERROR
CODE
WARNING MESSAGE DESCRIPTION
C0-51 AVANSIA_DEF_LAMI_HOPPER_FULL Lamination hopper full warning
C0-52 AVANSIA_DEF_LAMI_COVER_OPEN Lamination unit cover open
C0-53 AVANSIA_DEF_LAMINATE_UNSUPPORTED Lamination film not supported
C0-54 AVANSIA_DEF_LAMINATE_END Lamination film end
C0-55 AVANSIA_DEF_NO_LAMINATE No Lamination film detected
C0-56 AVANSIA_DEF_LAMI_TEMP_NOT_READY Lamination unit temperature requires heating up