Test Setup - Test Applications
Power Blazer 87
RFC 6349
RFC 6349
RFC 6349 is used to confirm that the Ethernet service is able to properly
carry TCP traffic.
The RFC 6349 test has to be executed in conjunction with a remote
compatible unit in RFC 6349 DTS or TCP Throughput DTS operation
mode allowing bidirectional testing. For iPerf Compatible Server operation
mode (iPerf v2), a remote iPerf Compatible Client is required at the other
end for unidirectional testing. The test provides independent results for
each test direction. The results from local-to-remote and remote-to-local
are available on the local testing unit.
Typical RFC 6349 test application:
EVC
Testing Unit Remote Unit
EXFO Unit
EXFO Unit
EVC
Testing Unit Remote Unit
iPerf Compatible Client
EXFO Unit
iPerf Compatible Server
To Next Page
Loading...
