EXFO FTBx-88260 - Streams - Frame Loss; Out-Of-Sequence; Streams - Jitter

Test Results
536 FTBx-88000 Series
Streams - Frame Loss / Out-of-Sequence
Streams - Frame Loss / Out-of-Sequence
From the Test menu, tap Results, Streams, and the Frame Loss /
Out-Of-Sequence tab.
Note: For Dual Port topology select the port to be displayed.
 Stream indicates the stream identification number.
 Thresholds button allows setting the pass/fail thresholds (refer to QoS
Metrics on page 430).
 Frame Loss: See QoS Metrics on page 907.
 Out-Of-Sequence: See QoS Metrics on page 907.
Streams - Jitter
From the Test menu, tap Results, Streams, and the Jitter tab.
Note: For Dual Port topology select the port to be displayed.
 Stream: Indicates the stream identification number.
 Jitter is measured for each stream on all valid frames (in-sequence
frames, valid Jitter tag, and no FCS error) received. Current, Average,
Minimum, Maximum, and Estimate delay values are reported.
Note: For the Current value, Not measurable is displayed when no delay has
been measured in the last second.
 Thresholds button allows setting the pass/fail thresholds (refer to QoS
Metrics on page 430).