Test Results
Power Blazer 585
Summary - FlexO BERT
Summary - FlexO BERT
From the test menu, tap Results, and the Summary tab.
Client ID allows selecting the client identification number.
Type indicates the ODUk container (client).
Test Status displays the current status of the test.
--: Idle state, the test is not running or results are not available.
In Progress: The test is running.
Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Start Time indicates the date and time the test was started. The date
and time reset every time the test is restarted or reset.
Test Recovery, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recovery field. Refer to
Power Failure Recovery on page 789.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 496.
FlexO Group
Displays for each instance, its number, port number, skew (available with
multiple instances on multiple ports), FlexO alarms (see FlexO Group on
page 900), and OTUCn alarms (see OTUCn on page 905).
To Next Page
Loading...
