Pop-Up
Power Blazer 977
IPv6 Address Configuration
IPv6 Address Configuration
IP
Link-Local IPv6 Address (LLA) is used for local communication
between on-link neighbors and for Neighbor Discovery process.
Mode
Stateless Auto (default) allows automatic generation of the IPv6
address based on the MAC address.
Static allows entering the IP Address.
Address, available with Static mode, allows selecting the
Link-Local IPv6 Address. The accepted range is from
FE80:0000:0000:0000:0000:0000:0000:0000 to
FE80:0000:0000:0000:FFFF:FFFF:FFFF:FFFF. The default address
is FE80::[Interface ID], where [Interface ID] is generated from
the source MAC address. When the Address field is selected for
editing using virtual keyboard, the Previous IPs button appears
allowing the selection of a previously configured IP address.
Global IPv6 Address (GUA) is used to communicate with on-link
neighbors and for global communication with hosts outside the
subnet.
Mode
None disables the Global IPv6 Address and Default Gateway.
Stateless Auto (default) allows automatic generation of the IPv6
address based on the Link-Local address interface ID and the
prefix obtained from the router advertisements. If no Interface ID
has been obtained for the Link-Local IPv6 Address, the global
address will not be generated.
Static allows entering the IP address.
To Next Page
Loading...
