Test Results
Power Blazer 607
Summary - Smart Loopback
Summary - Smart Loopback
From the Test menu, tap Results, and the Summary tab.
Test Status displays the current status of the test. The global test
pass/fail verdict is displayed next to the Test Status field when
enabled.
--: Idle state, the test is not running or results are not available.
In Progress: The test is running.
Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Aborted: The test is interrupted; stopped before the set timer.
Start Time indicates the date and time the test was started. The date
and time reset every time the test is restarted or reset.
Test Recovery, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recovery field. Refer to
Power Failure Recovery on page 789.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 496.
Traffic
Note: See Traffic - Ethernet on page 639 for more information.
To Next Page
Loading...
