Test Results
606 FTBx-88000 Series
Summary - RFC 6349
Ideal L4 indicates the ideal TCP throughput metric. Available when the
Pass/Fail Verdict is enabled; the pass/fail verdict icon is displayed next
to this metric; a value greater or equal to the defined CIR threshold
gives a pass verdict.
Actual L4 indicates the maximum average of actual TCP Throughput
metric. The pass/fail verdict icon is displayed next to this metric when
enabled. A value greater or equal to the defined Threshold (% of
ideal) gives a pass verdict.
Threshold (% of ideal) allows entering the TCP Throughput as a
percentage of the defined CIR that will be used to declare the pass/fail
verdict for both directions: 0 to 100 %; default is 95 %. The calculated
throughput based on the selected threshold is displayed for both
directions. Available when the Pass/Fail Verdict check box is selected.
Max CWND indicates the sum of the maximum average congestion
window for each connection. Only reported at the end of the test.
Min RTT indicates the minimum Round-Trip Time; the time elapsed
between the transmission of a Segment and the reception of the
corresponding ACK. Only reported at the end of the test.
Max RTT indicates the maximum Round-Trip Time; the time elapsed
between the transmission of a Segment and the reception of the
corresponding ACK. Only reported at the end of the test.
Average RTT indicates the average Round-Trip Time; the time elapsed
between the transmission of a Segment and the reception of the
corresponding ACK. Only reported at the end of the test.
Nb of Connections indicates the total number of TCP connections
initiated during the test.
TCP Efficiency (%) indicates the TCP Efficiency metric based on
transmitted and retransmitted bytes.
To Next Page
