Test Results
Power Blazer 599
Summary - RFC 2544
Summary - RFC 2544
From the Test menu, tap Results, and the Summary tab.
Start Time indicates the date and time the test was started. The date
and time reset every time the test is restarted or reset. For Dual Test
Set, this is the only information available on the remote unit.
Test Recovery, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recovery field. Refer to
Power Failure Recovery on page 789.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 496.
Remote unit in Dual Test Set Mode indicates that this unit is set as
remote but the DTS Connection is not established.
Remote unit in use and locked for Dual Test Set indicates that this
unit is used for Dual Test Set as the remote unit.
To Next Page
Loading...
