Test Results
548 FTBx-88000 Series
Summary - Cable Test
Summary - Cable Test
From the Test menu, tap Results, and the Summary tab.
Test Status displays the current status of the test. The global test
pass/fail verdict is displayed next to the Test Status field when
enabled. The Pass/Fail verdict is based on the following criteria: The
worst pair’s Wire Map, Prop. Delay, Delay Skew, and Length.
--: Idle state, the test is not running or results are not available.
In Progress: The test is running.
Completed: The test is completed or manually stopped.
Start Time indicates the date and time the test was started. The date
and time reset every time the test is restarted or reset.
Cable
Note: When no value is available, “--” is displayed.
Wire Map indicates the Wire Map result for the pair having the worst
Wire Map. The distance to fault is also displayed when a fault is
identified. The Pass/Fail verdict is also displayed, when enabled.
Prop. Delay (ns) indicates the propagation delay value for the pair
having the longest propagation delay. The Pass/Fail verdict is also
displayed when enabled.
To Next Page
Loading...
