Test Results
602 FTBx-88000 Series
Summary - RFC 6349
Summary - RFC 6349
From the test menu, tap Results, and the Summary tab.
Note: For Dual Test Set on the remote unit only the following are available: Test
Status, Start Time, Test Recovery, Remote unit in Dual Test Set Mode,
and Remote unit in use and locked for Dual Test Set.
Note: For iPerf Compatible Server operation mode only the following are
available: Test Status, Start Time, Test Recovery, Active Connections,
and Connection Details.
Test Status displays the current status of the test. The global test
pass/fail verdict is displayed next to the Test Status field when
enabled. A fail verdict is declared if any of the following conditions
occurs: Link Down, LOS, TCP Throughput verdict failed, or any abort
condition.
--: Idle state, the test is not running or results are not available.
For RFC 6349 DTS and TCP Throughput DTS:
In Progress: The test is running.
Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
To Next Page
Loading...
