EXFO FTBx-88260 - Flexo;Otucn

Setup
294 FTBx-88000 Series
FlexO/OTUCn
FlexO/OTUCn
Note: Available with FOICn interfaces.
From the test menu, tap Setup, Test Configurator, the Client block, and
the FlexO-OTUCn tab.
Note: Only one client is supported in the FlexO Group.
FlexO
 FlexO Status indicates the global FlexO group status: up (green arrow)
or down (red arrow).
 FlexO Instance ID allows configuring the instance identifier (1 to 254)
for each 100G instance of the FlexO client.
 FlexO Group ID allows selecting the FlexO group identification
number.
OTUCn
 Client ID allows selecting the client identification number.
 Type indicates the ODUk container (client).
 Size (Gbit/s) indicates the ODUk client size.