Test Results
Power Blazer 577
Summary - FlexE BERT
Summary - FlexE BERT
From the test menu, tap Results, and the Summary tab.
Test Status displays the current status of the test.
--: Idle state, the test is not running or results are not available.
In Progress: The test is running.
Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Aborted: The test is interrupted; stopped before the set timer.
Start Time indicates the date and time the test was started. The date
and time reset every time the test is restarted or reset.
Test Recovery, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recovery field. Refer to
Power Failure Recovery on page 789.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 496.
FlexE Group
Indicates respectively for each PHY/Instance, its number, port number, link
status and skew (available with multiple PHY; refer to page 688). For FlexE
group global alarms, refer to FlexE Group on page 900.
To Next Page
Loading...
