EXFO FTBx-88260 - Gmp

Test Functions
690 FTBx-88000 Series
GMP
GMP
Note: Available with Transport test applications with either payload type 21
(PT21) or one of the following clients: 1GbE, 40GbE, 100GbE, Ethernet
(flex/GFP-F), or SONET/SDH (through ODU0).
From the Test menu, tap Functions, and the GMP tab.
 Channel available with Multi-Channel OTN allows the selection of the
channel number.
Generic Mapping Procedure
 TX Cm indicates the minimum and maximum Cm value transmitted
during the test.
 TX CnD indicates the minimum and maximum CnD value transmitted
during the test.
 RX Cm indicates the minimum and maximum Cm value captured
during the test.
 RX CnD indicates the minimum and maximum CnD value captured
during the test.