Test Functions
Power Blazer 689
FlexE Advanced
Reset Skew / Manual Skew
Allows the selection of a relative delay in nanoseconds that will be
introduced for each PHY.
Reset Skew sets all TX skew values to 0 ns.
Manual Skew allows setting the skew value for each PHY manually.
Refer to Manual Skew (PHY) on page 984.
PHY Skew Alarm Threshold (ns)
PHY Skew Alarm Threshold (ns) allows setting the threshold value
that will be used to declare the Excessive PHY Skew alarm: 50 ns to
1000 ns (default is 300 ns).
Default restores the default alarm threshold value.
To Next Page