EXFO FTBx-88260 - Modify Structure - CPRI;OBSAI BERT

Setup
Power Blazer 145
Modify Structure - CPRI/OBSAI BERT
Modify Structure - CPRI/OBSAI BERT
From the test menu, tap Setup, Test Configurator, and the Modify
Structure button.
Note: For Dual Port topology each port is configurable individually. Both ports
must be part of the same group of rates, either rates up to 10.1G or both at
24.3G).
 Interface allows the selection of the interface rate.
CPRI:
Unit Interface/Rate Connector
8870
8880
CPRI - 1.2G
CPRI - 2.4G
CPRI - 3.1G
CPRI - 4.9G
CPRI - 6.1G
CPRI - 9.8G
CPRI - 10.1G
Port 1 - SFP+
Port 2 - SFP+
88200NGE CPRI - 1.2G
CPRI - 2.4G
CPRI - 3.1G
CPRI - 4.9G
CPRI - 6.1G
CPRI - 9.8G
CPRI - 10.1G
Port 1 - SFP+
88260 CPRI - 1.2G
CPRI - 2.4G
CPRI - 3.1G
CPRI - 4.9G
CPRI - 6.1G
Port A1/A2/B1/B2 - SFP28
CPRI - 9.8G
CPRI - 10.1G
CPRI - 24.3G
Port A1/A2/B1/B2 - SFP28
Port A1/A2/B1/B2 - QSFP28