Getting Started
12 FTBx-88000 Series
Inserting and Removing Test Modules
Inserting and Removing Test Modules
Note: Refer to the platform user guide for more information on how to
insert/remove a module into/from the platform.
CAUTION
There is no need to turn off your unit before inserting or removing
FTBx- modules. However, inserting/removing modules without
following the instructions provided in the platform user
documentation could result in the following consequences,
depending on the operation underway when the modules are
inserted/removed:
unexpected behavior of the test applications,
instability of the system,
or cause irreparable damage to your modules.
To Next Page
Loading...
