EXFO FTBx-88260 - Cfp;Osfp;Qsfp;Sfp

Setup
242 FTBx-88000 Series
CFP/OSFP/QSFP/SFP
CFP/OSFP/QSFP/SFP
This tab gives hardware information related to the inserted transceiver
module.
From the test menu, tap Setup, Test Configurator, tap on the interface
block or on the Local block for iSAM, and on the CFP/OSFP/QSFP/SFP tab.
 Port, available with FlexE BERT/FlexO BERT, allows selecting the
physical port to be displayed.
 FlexO Instance ID, available with FlexO BERT, indicates the FlexO
instance identifier per port.
 FlexE PHY Number, available with FlexE BERT, indicates the FlexE
PHY number assigned to the port.
Parameters
The following parameters are retrieved from the transceiver:
Parameter
CFP2
CFP4
CFP8
QSFP+
QSFP28
QSFP-DD
OSFP
SFP
SFP+
SFP28
SFP56
Module ID
a
X X X X
Vendor Name X X X X
Part Number X X X X
Serial Number X X X X
Hardware Revision X X X X
Firmware Version X X - -
Revision Compliance - - X -
Connector Type X X X X
Speed X X X X
Type/Compliance Code X X X
b
X