Safety Information
Power Blazer 7
Laser Safety Information
Laser Safety Information
Your instrument is in compliance with standards IEC 60825-1: 2014 and 21
CFR 1040.10, as per Laser Notice No. 42, dated December 18, 1989.
Laser radiation may be encountered at the optical output port.
The following label indicates that a product contains a Class 1 source:
Note: Refer to the platform user guide for additional test equipment safety
information and ratings.
WARNING
When the LASER LED is on or flashing, the module is transmitting an
optical signal on the transceiver ports.
To Next Page
Loading...
