EXFO FTBx-88260 - Streams - Throughput; Customer Frame Throughput

Test Results
538 FTBx-88000 Series
Streams - Throughput / Customer Frame Throughput
Streams - Throughput /
Customer Frame Throughput
From the Test menu, tap Results, Streams, and the Throughput or the
Customer Frame Throughput tab.
Note: For Dual Port topology select the port to be displayed.
 Stream indicates the stream identification number.
 TX Rate indicates the transmission rate.
 RX Rate is measured for each stream on all valid frames (valid
Throughput tag with no FCS error). Current, Average, Minimum, and
Maximum throughput results are reported.
Note: A Current value of 0 indicates that no RX rate has been measured in the
last second.
 Total indicates the total TX and current measured RX throughput of all
valid frames (valid Throughput tag with no FCS error).
 Thresholds button allows setting the pass/fail thresholds (refer to QoS
Metrics on page 430). Not available on Customer Frame Throughput
tab.