Setup
430 FTBx-88000 Series
Streams - Profile
QoS Metrics
Note: QoS Metrics settings apply to all streams.
Global Pass/Fail Verdict check box when selected (default) enables
the pass/fail verdict for all streams.
Global Thresholds Type button
Throughput allows selecting if the verdict is based on the Current
Throughput (default) or Average Throughput.
Frame Loss allows selecting if the verdict is based on a frame loss
Count (default) or Rate.
Out-of-Sequence allows selecting if the verdict is based on an
Out-of-Sequence Count (default) or Rate.
Throughput (%) check box when selected enables the throughput
pass/fail verdict and allows setting the minimum and maximum
threshold values.
Customer Frame Throughput. available when using Provider
Encapsulation, displays the calculated customer frame throughput
minimum and maximum thresholds based on the throughput values.
Frame Loss Count/Rate check box when selected enables the Frame
Loss pass/fail verdict and allows setting the threshold of frame that are
lost.
For Count, enter the maximum count of frame that are lost before
declaring a fail verdict: 0 (default) to 9999999999.
For Rate, enter the maximum rate of frame that are lost before
declaring a fail verdict: 1.0E-14 (default) to 1.0E00.
To Next Page
