Setup
Power Blazer 431
Streams - Profile
Out-of-Sequence Count/Rate check box when selected enables the
Out-of-Sequence pass/fail verdict and allows setting the threshold of
frames that are Out-of-Sequence.
For Count, enter the maximum count of frames that are
Out-of-Sequence before declaring a fail verdict: 0 (default) to
9999999999.
For Rate, enter the maximum rate of frames that are Out-of-Sequence
before declaring a fail verdict: 1.0E-14 (default) to 1.0E00.
Jitter check box when selected enables the Jitter verdict and allows
setting the maximum Jitter before declaring a fail verdict.
Latency check box when selected enables the Latency verdict and
allows setting the maximum Latency before declaring a fail verdict.
To Next Page
Loading...
