Setup
322 FTBx-88000 Series
Labels
VT Path (V5) / TU Path (V5): The V5 byte is allocated to indicate the
content of the VT/TU path, including the status of the mapped
payloads.
Generated allows the selection of the V5 byte value (refer to V5 on
page 721).
PLM-V/UNEQ-V / LP-PLM/LP-UNEQ check box when selected (cleared
by default) enables the Payload Mismatch and VT/TU UNEQ
monitoring.
Expected allows the selection of the expected V5 byte value (refer to
V5 on page 721).
To Next Page
Loading...
