Setup
342 FTBx-88000 Series
MAC/IP/UDP
eCPRI
Message Type allows selecting the message type to be generated: IQ Data,
Bit Sequence, Real-Time Control Data, or Generic Data Transfer.
Payload
For RFC 2544 and EtherBERT, indicates that the frame structure contains a
Payload.
For Traffic Gen & Mon, allows the selection of both user defined header
and pattern. Payload is not configurable when the QoS Metrics Tags
Insertion check box is selected (see the Global tab).
User Defined Header check box when selected (cleared by default)
allows defining a 16-byte header.
Pattern allows the selection of a pattern: 00 to FF (default is CC).
FCS
FCS indicates that the frame structure contains an Ethernet FCS.
To Next Page
Loading...
