Setup
Power Blazer 433
SyncE
ESMC Generation
Generated QL check box when selected (default) enables the
generation of the selected QL message. See page 516 for the list of QL
message (default is QL-EEC2/ST3). For 1GE Electrical interface using
Local Clock set to Slave, Generated QL is dimmed with its check box
selected and set to QL-DNU/DUS.
QL Rate (frame/s) defines the frame rate at which the ESMC transmit
the QL message value: 1 (default), 5, or 10 frames per second. For 1GE
Electrical interface using Local Clock set to Slave, the QL Rate is
dimmed and set to 1 frame/s.
Restore SyncE Defaults
Reverts the test application to its default factory settings.
To Next Page
Loading...
