Pop-Up
Power Blazer 967
DS1 Loopback
Loop-Down injects the selected loop down code. The loop code will
be generated continuously for a maximum of 10 seconds or until the
loopback is confirmed. After 10 seconds, if the loopback has failed, a
Loop-Down command is sent. A pop-up window appears indicating
the loop code injection progress and result. The text box next to the
Loop-Down button indicates the selected loop down code.
Modify Loop Codes allows the configuration of 10 DS1 loop code
pairs. Configure each loop code Name, Loop-Up and Loop-Down
values. The name field allows up to 16 characters. Loop-Up and
Loop-Down range is from 3 to 16 bits (000 to 1111111111111111).
The default DS1 loop codes correspond to the DS1 In-Band loop codes
(Loop-Up=10000, and Loop-Down=100).
To Next Page
Loading...
