CHAPTER 25
PAGE 4
PAGE DATE: 7. July 2010
MAINTENANCE MANUAL EXTRA 300LT
FLIGHT COMPARTMENTS
Removal/Installation
1 Loosen the leather protection cuff from the control stick.
2 Remove quickpins of the backrest steel tubes and the
backrest-to-seat connection.
3 Remove rear seat backrest.
4 Disconnect backrest from the steel tubes if necessary
by removing the resp. bolts.
5 Remove the seat attachment bolts (front side of the rear
seat) and the quickpins of the seat steel frame.
6 Remove the seat.
7 Disconnect the seat from the steel frame and the crotch
strap if necessary by removing the resp. bolts.
8 Assemble and install in reverse sequence of disassem-
bly resp. removal.
Seat belts
To Next Page
Loading...
